產品詳情
Main features:
主要特點：
1) Big tube size , long constant temp. area, precise temp., suitable for multi-sample sintering or medium test.
管徑大，恒溫區長，溫度精確，適用于多樣品燒結或中試實驗.
2) Inside big outer quartz tube can put inner tube, making big-area monolayer graphene growing test.
在大石英管內可選加裝內管，可做大面積單層石墨烯生長。
3) The device widely used in the field of semi-conductor, nanometer material, carbon fibre, graphene, etc. with cost-effective feature.
該款廣泛應用在半導體、納米材料、碳纖維、石墨烯等領域，是一款性價比極高的設備。
4) NC display screen makes operations easier, more convenient.
配備數控顯示屏讓操作更簡單，更方便。
Technical Parameters
技術參數
|
Power 輸入電源 |
· Power rated: 12KW (208-240V) · 額定功率：12KW (208-240V) |
|
Voltage 電壓 |
· Voltage rated: AC208-240V 50/60HZ · 額定電壓： AC208-240V 50/60HZ |
|
Working Temperature 工作溫度 |
· Max. Temperature: 1100 °C ( 1 hr) zui高溫度：1100℃ (1小時) · Continuous working temperature: ≤1000℃ 持續工作溫度：≤1000℃ · Recommended heating Rate: ≤10°C /min 推薦升溫速率：≤10℃/分 |
|
控溫方式 |
· PID automatic control and auto-tune function. 模糊PID控制和自整定調節 · 30 programmable segments for precise thermal processing. 智能化30段可編程控制 · Built-in protection for the over-heated and broken thermocouple. 超溫和斷偶報警功能 |
|
Length of heating zone 加熱區長度 |
· 300+300+300mm |
|
Length of constant zone 恒溫區長度 |
· 150+200+150mm |
|
Heating Elements 加熱元件 |
· Resistance wire, Fe-Cr-Al Alloy doped by Mo · 電阻絲（摻鉬鐵鉻鋁合金） |
|
Temperature Accuracy 控溫精度 |
+/- 1 °C |
|
Dimensions 尺寸 |
· Tube size: Φ150/210/280*1300mm (optional) · 爐管尺寸：Φ150/210/280*1300mm (可選) · Overall size: 1300*650*1000mm · 外形尺寸：1300*650*1000mm · Two fibrous ceramic tube blocks are included for blocking heat radiation generated from tube center. (Ceramic blocks must be fully inserted into the furnace chamber before heating). · 兩個氧化鋁管堵阻擋管中心產生的熱輻射（氧化鋁管堵必須在加熱前塞進爐膛） |
|
真空法蘭 |
· One end is KF25 quick clamp flange 一端為KF25快速卡箍法蘭 · Another end is screw tighten flange with gas inlet 另一端為進氣螺絲緊固法蘭 |
|
Vacuum Pressure 真空壓力 |
· 10^-1pa can be achieved by mechanical pump 機械泵可達10^-1pa · 10^-3pa can be reached by molecular pump 分子泵可達10^-3pa
|
|
Net Weight 凈重 |
250kg |
|
Warranty 質保 |
One year limited warranty with lifetime support (Such consumable parts as tube, quartz block, and O-rings, etc. are NOT supported by the warranty) 一年質保終身支持（消耗品如爐管，石英管堵，O型圈等不在質保范圍內） |
|
Warning 注意事項 |
· Toxic or explosive gasses are not recommended for use with this furnace without necessary safety controls and supervision. Please put furnace into fume hood for better safety · 沒有安全控制和監督的情況下，不建議使用有毒或爆炸性氣體。為了安全，請把爐子放在通風處。 · Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating. · 在使用過程中爐膛表面可能出現細小裂紋。這是正常情況，裂紋可以用氧化鋁涂層修復。 |
|
Compliance 認證 |
· CE Certified CE認證 |
